MRGS Rail

Stabling Train and Tram Swing Gate

MSGB
  • Maximum Control restricting Pedestrian Access
  • Robust Construction
  • Australian RHS Steel
  • Australian made and designed
  • Motor Controller 110 volts
  • Each Gate has 4 Maglocks

The MRGS Stabling Swing Gate has been a market leader for more than 20 years. It is designed for the maximum control of restricting pedestrians from security access points. It is constructed from fully welded Australian made RHS steel in the gate frame and support posts, with 25 x 25mm RHS uprights. All fabricated steel is hot dipped galvanized for total protection and maximum life span. The MRGS allows for single leaf spans of up to 8 metres. Powder coating is optional from a wide selection of powder coating colours.

phone icon

1300 364 864 (Australia)
+61 3 9339 2900 (outside Australia)

Product pictures
Product video

Drive System

Our standard speed drive systems incorporates a 3 phase drive motor with PLC and inverter control. Under power failure conditions the gate can be easily released for manual operation. Motor controller is 110 volts to suit standard railway supply.

Safety Devices

Standard safety devices include PE beams, inductive loop detectors and signage for use on automatic gate systems. Optional safety devices include flashing lights and audible alarms. Each gate has 4 maglocks: 2 for locking in the opened position and 2 for locking the closed position.

Accessories

A variety of accessories are available such as climb protection - spikes, barbed wire and pressed spears, uninterrupted power supply, steel cladding and chain wire mesh. Bi-parting gates can also be applied to multiple rail tracks. Gates can be locked by magnetic or mechanical locking devices.

Technical Data - Drive System Type MRGS1 MRGS2
Maximum Gate Opening Length mm 5,000 8,000
Motor Power w 370 550
Voltage VAC 110 240
Duty Cycle % 100 100
Opening Speed Sec 10 10
Warranty Year 1 1